Flip Ramp

Questions on Flip Ramp

• From Shilo Rice at 2/12/13 7:45 PM
  • Hello. I know the regular Liberator Ramp has a 12" height. What height does the Flip Ramp provide? Thanks.
  • Dear Customer,
    To respond to both questions. The height of the Flip Ramp when flipped out is 12" and 15" when it is flipped up into a cube.
    Hope this helps!
  • Do you find this question helpful?  Yes  No
• From Sam at 4/9/13 3:22 PM
  • I would like to know how high the butt is raised with the Wedge and the Flip Ramp, and the Ramp. What else should I consider in purchasing. We are slender-medium in height and weight.
    
    thank you.
  • Here are the heights of the Flip Ramp:
    Opened height at the tall end where the butt would be (please note these measurements do not inculde someone one it-so please take into account the weight of your patner) 12 inches. The lower part of the Flip Ramp measures 3inches in the open position. The flip ramp closed measures 15" tall.
    Please note that all the Ramp heights are in the sizing chart to the right of the product drop down on the product page. The measure 10, 12 and 14 inches respectively. Also the wedge is always 7 inches of life, but again comression should not happen on the product until about 180 lbs is on the product, and then you only get a tiny bit of compression. Hope this helps....would recommend calling customer service if you are still on the fence of what to purchase.
  • Do you find this question helpful?  Yes  No
• From John at 5/6/13 7:51 PM
  • Can the flip ramp be used in combination with the wedge just like the normal ramp?
  • you can definately add a wedge to this for torso and head comfort once in use.
  • Do you find this question helpful?  Yes  No